1. Open firmware file (try "NEW_HWK_3.08 HWL Flash File.bin")
2. Select microcontroller - MSP430F11x1A !!!
3. Press ERASE to erase memory (You can't do READ or VERIFY because firmware is secured with password and you can only erase it and flash new one)
4. Write new firmware - PROGR
If everything went well, we will see information about the successful completion of the firmware 

After flashing the firmware, insert the HWK module back into the UFS, disconnecting everything unnecessary.
Afterwards, you must update the HWK using the latest HWK Update Client.

1990fvv

Translated by Bs0Dd